High Gain 80dB Gsm Booster Band8- 900MHz Single Band Mobile Signal Booster 2W 900MHz EGSM Network Repeater 33dBm ALC/MGC Phone Amplifier
Regular cell phone signal booster full kit need:
1 – Cell phone signal booster
2 – Power adapter
3 – User manual
4 – Outdoor antenna like LPDA Antenna
5 – Indoor Omni Ceiling Antenna
6 – 10 meters outdoor cable
Working Principle
It should be noted that there are many factors affecting the coverage area, so the actual coverage effect may differ from the estimated result. In order to ensure the best performance of the signal booster, the outdoor antenna should be installed in a location where the outdoor signal quality is superior. The higher the signal strength at that location, the more stable and sustained the signal received and transmitted by the antenna, thus extending the signal coverage. In addition, the direction of the outdoor antenna should be consistent with the base station to ensure optimal signal reception.
Specification should care about :
| Model No | KT33-GSM Signal Booster | ||
| Parameter data | Uplink | Downlink | |
| Frequency Range | 890-915MHz | 935-960MHz | |
| Output Power | 27 ±2dBm | 33 ±2dBm | |
|
Gain |
70 dB | 80 dB | |
| Bandwidth | Wide Band | ||
| Automatic Gain Control | >20dB | ||
| Ripple in Band | ≤5dB | ||
| Intermodulation Products | 9KHz~1GHz | ≤ -36 dBm | |
| 1GHz~12.75GHz | ≤ -30 dBm | ||
| Spurious Emission | 9KHz~1GHz | ≤ -36 dBm | |
| 1GHz~12.75GHz | ≤ -30 dBm | ||
| Noise Figure @ max. gain | ≤ 6 dB | ||
| VSWR | ≤3 | ||
| MTBF | >50000 hours | ||
| Power Supply | AC:90~265V, 50/ 60Hz;DC:9V 5A | ||
| Power Consumption | < 20W | ||
| Impedance | 50 ohm | ||
| Mechanical Specification | |||
| RF Connector | N-Female | ||
| Cooling | Heatsink Convection cooling | ||
| Dimensions (D x W xH ) | 270*170*56mm | ||
| Weight |
3.8KG |
||
| Installation Type | Wall Installation | ||
| Environment Conditions | IP40 | ||
| Humidity | < 90% | ||
| Operating Temperature | -10°C ~ 55°C | ||
