Kingtone Mobile Signal Repeater/Booster/Amplifier is a top of the line product that supports frequency bands (B20 800 & B3 1800 ). The adjustable controls all you to change your signal preferences for smoother voice and data transmissions. Experience improved signal strength regardless of your phone’s present coverage strength or frequency band!
Before buying please note!
1. Make sure the frequency band of your carrier is suitable for this item. Otherwise the device can’t work for you. If you do not so clear the frequency of your phone, you would click this link
www.frequencycheck.com for check the frequency band of your carriers.
2. Make sure you can receive good signal that you want to amplify on your house outside. Which must be can getting 3~5 bar signal (-70dB~90dB signal strength) on your mobile phone. Please note that the signal booster can only boost the mobile phone network signal, but it does not help to generate any signal. For example, if your outside signal has 0 bar, it can’t work or bring you any signal. Below is the method of check the mobile phone signal strength.
Applications
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
Technical Specifications
| Items | Testing Condition | Specification | MEMO | ||||
| Uplink | Downlink | ||||||
|
Working Frequency(MHz) |
GSM/WCDMA |
Nominal Frequency |
832 – 862MHz |
791 -821MHz |
|
||
|
DCS/LTE |
Nominal Frequency |
1710-1785MHz |
1805-1880MHz |
|
|||
|
Bandwidth |
GSM/WCDMA |
Nominal Band |
30MHz |
|
|||
|
DCS/LTE |
|
75MHz |
|
||||
|
Gain(dB) |
Nominal Output Power-5dB |
95±3 |
|
||||
|
Output Power (dBm) |
GSM/WCDMA |
LTE modulating signal |
+37 |
+43 |
|
||
|
DCS/LTE |
LTE modulating signal |
+37 |
+43 |
|
|||
|
ALC (dBm) |
Input Signal add 20dB |
△Po≤±1 |
|
||||
|
Noise Figure (dB) |
Working in-band（Max. Gain） |
≤5 |
|
||||
|
Ripple in-band (dB) |
Nominal Output Power -5dB |
≤3 |
|
||||
|
Frequency Tolerance (ppm) |
Nominal Output Power |
≤0.05 |
|
||||
|
Time Delay (us) |
Working in-band |
≤5 |
|
||||
|
ACLR |
Working in-band |
Compatible with 3GPP TS 36.143 and 3GPP TS 36.106 |
For LTE, PAR=8 |
||||
|
Spectrum Mask |
Working in-band |
Compatible with 3GPP TS 36.143 and 3GPP TS 36.106 |
For LTE, PAR=8 |
||||
|
Gain Adjustment Step (dB) |
Nominal Output Power -5dB |
1dB |
|
||||
|
Gain Adjustment Range(dB) |
Nominal Output Power -5dB |
≥30 |
|
||||
|
Gain Adjustable Linear(dB) |
10dB |
Nominal Output Power -5dB |
±1.0 |
|
|||
|
20dB |
Nominal Output Power -5dB |
±1.0 |
|
||||
|
30dB |
Nominal Output Power -5dB |
±1.5 |
|
||||
|
Spurious Emission(dBm) |
9kHz-1GHz |
BW:30KHz |
≤-36 |
≤-36 |
|
||
|
1GHz-12.75GHz |
BW:30KHz |
≤-30 |
≤-30 |
|
|||
|
VSWR |
BS/MS Port |
1.5 |
|
||||
|
I/O Port |
N-Female |
|
|||||
|
Impedance |
50ohm |
|
|||||
|
Operating Temperature |
-25°C ~+55°C |
|
|||||
|
Relative Humidity |
Max. 95% |
|
|||||
|
MTBF |
Min. 100000 hours |
|
|||||
|
Power Supply |
DC-24V/AC220V(50Hz)/AC110V(60Hz)( ±15%) |
|
|||||
|
Remote Monitoring Function (Option) |
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power |
|
|||||
|
Remote Control Module (Option) |
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
||||||
-
Kingtone Dual Band Signal Repeater GSM 2G 3G 4G...
-
20W High power outdoor repeater,43dbm GSM900/DC...
-
outdoor 5Watt 37dbm gsm 900 1800 2g 3g mobile r...
-
Kingtone Rural Mobile Network Amplifier Dual Ba...
-
33dBm GSM900/WCDMA2100 2g 3g 2W Band Selective ...
-
33dBm 2Watt GSM900 DCS/LTE1800 Dual Band Phone ...