product_bg

2W IDEN800 +33dBm Band Selective Repeater

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty 2W IDEN800 +33dBm Band Selective Repeater Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is ...


  • Brand: Kingtone/JIMTOM
  • Min.Order Quantity: 1 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Warranty: 12months
  • Product Detail

    Product Tags

    • Introduction
    • Mainfeature
    • Application&scenarios
    • Specification
    • Parts/Warranty
    2W IDEN800 +33dBm Band Selective Repeater
    Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
    Mainfeature
    Main Features
    ◇ High linearity PA; High system gain
    ◇ Intelligent ALC technology
    ◇ Full duplex and high isolation
    ◇ Sharp filter curve◇ Automatic Operation convenient operation
    ◇ Modular design ease to maintain
    ◇ Remote control/monitor/alarm via RF MODEM or Ethernet
    ◇ IP65 chassis design for both indoor and outdoor application
    Application&scenarios
    "
    "
    Applications
    To expand signal coverage of fill signal blind area where signal is weak or unavailable. Outdoor: Airport, Tourism Region, Golf Course, Tunnel, Factory, Mining District, Village etc. Indoor: Hotel, Exhibition Center, Basement, Shopping Mall, Office, Packing Lot etc. It is mainly applicable to such case: The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm; And can meet the requirement of antenna isolation to avoid self‐oscillation. Dimensions and weight Dimensions(package size): 530mm*310mm*164mm Weight: N.W.17KG G.W.19KG
    Specification

    Technical Specifications  

    Items

    Testing Condition

    Specification

    Meno

    Uplink

    Downlink

    Working Frequency(MHz)

    Nominal Frequency

    806– 821MHz

    851 – 866MHz

     

    Bandwidth

    Nominal Band

    15MHz

     

    Gain(dB)

    Nominal Output Power-5dB

    95±3

     

    Output Power (dBm)

    GSM modulating signal

    33

    33

     

    ALC (dBm)

    Input Signal add 20dB

    Po≤±1

     

    Noise Figure (dB)

    Working in-bandMax. Gain

    ≤5

     

    Ripple in-band (dB)

    Nominal Output Power -5dB

    ≤3

     

    Frequency Tolerance (ppm)

    Nominal Output Power

    ≤0.05

     

    Time Delay (us)

    Working in-band

    ≤5

     

    Gain Adjustment Step (dB)

    Nominal Output Power -5dB

    1dB

     

    Gain Adjustment Range(dB)

    Nominal Output Power -5dB

    ≥30

     

    Gain Adjustable Linear(dB)

    10dB

    Nominal Output Power -5dB

    ±1.0

     

    20dB

    Nominal Output Power -5dB

    ±1.0

     

    30dB

    Nominal Output Power -5dB

    ±1.5

     

    Out of Band Gain

    ±400KHz

    Nominal Output Power -5dB

    65

     

    ±600KHz

    Nominal Output Power -5dB

    55

     

    ±1MHz

    Nominal Output Power -5dB

    45

     

    ±5MHz

    Nominal Output Power -5dB

    35

     

    Inter-modulation Attenuation (dBc)

    Working in-band

    ≤-45

     

    Spurious Emission(dBm)

    9kHz-1GHz

    BW:30KHz

    ≤-36

    ≤-36

     

    1GHz-12.75GHz

    BW:30KHz

    ≤-30

    ≤-30

     

    VSWR

    BS/MS Port

    1.5

     

    I/O Port

    N-Female

     

    Impedance

    50ohm

     

    Operating Temperature

    -25°C ~+55°C

     

    Relative Humidity

    Max. 95%

     

    MTBF

    Min. 100000 hours

     

    Power Supply

    DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

     

    Remote Monitoring Function

    Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

     

    Remote Control Module

    RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

     

    Parts/Warranty
    1year warranty for equipment ,6month for accessories

    ■ contat supplier ■ Solution&Application

    • *Model : KT-RS900/1800-B25/25-P33B
      *Product Category : 2W GSM900MHz Air Coupling wireless Frequency Shifting Repeater

    • *Model : KT-TRP-B15-P45-B
      *Product Category : 30W Tetra800MHz Band Selective Repeaters

    • *Model : KT-4GLTE REPEATER
      *Product Category : 2watt Kingtone 4g 2600Mhz repeater ,4G LTE cell phone signal amplifier repeater

    • *Model :
      *Product Category : yagi antenna


  • Previous:
  • Next: