product_bg

factory Outlets for Passive Cellular Repeater - 30W CDMA800MHz High Power Amplifier Long Distance Coverage Outdoor Booster Band Selective Repeaters – Kingtone

Short Description:

Introduction Mainfeature Application&scenarios Specification Parts/Warranty Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS v...


Product Detail

Product Tags

Related Video

Feedback (2)

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for Gsm Amplifier Repeater , Gsm Repeater Olx , Mobile Gsm 980 Repeater , Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
factory Outlets for Passive Cellular Repeater - 30W CDMA800MHz High Power Amplifier Long Distance Coverage Outdoor Booster Band Selective Repeaters – Kingtone Detail:

  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty

Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Mainfeature
Features:
1,High linearity PA; High system gain;
2,Intelligent ALC technology;
3,Full duplex and high isolation from uplink to downlink;
4,Automatic Operation convenient operation;
5,Integrated technique with reliable performance;
6,Local and remote monitoring (optional) with automatic fault alarm &remote control;
7,Weatherproof design for all-weather installation;

Application&scenarios
GSM850MhZ SIGNAL Repeater Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.

Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.

Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.

It is mainly applicable to such case:

The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;

And can meet the requirement of antenna isolation to avoid self‐oscillation.

 width=
 width=
Specification

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

824 – 849MHz

869 – 894MHz

Gain(dB)

Nominal Output Power-5dB

95±3

Output Power (dBm)

GSM modulating signal

37

45

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-bandMax. Gain

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

RMS Phase Error (°)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty
warranty :1year for repeater ,6months for accessories

■ contat supplier ■ Solution&Application

  • *Model : KT-TRP-B15-P37-B
    *Product Category : 5W Tetra800MHz Band Selective Repeaters

  • *Model :
    *Product Category : UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems

  • *Model : KT-GSM/WCDMA Repeater
    *Product Category : 40dbm GSM900/2100 10W Band Selective Repeater ,900 2100 dual band repeater

  • *Model :
    *Product Category :


Product detail pictures:

factory Outlets for Passive Cellular Repeater - 30W CDMA800MHz High Power Amplifier Long Distance Coverage Outdoor Booster Band Selective Repeaters – Kingtone detail pictures


Related Product Guide:
What is MIMO?

Our intention should be to fulfill our consumers by offering golden provider, superior price and superior quality for factory Outlets for Passive Cellular Repeater - 30W CDMA800MHz High Power Amplifier Long Distance Coverage Outdoor Booster Band Selective Repeaters – Kingtone, The product will supply to all over the world, such as: Namibia, Egypt, Haiti, During in 11 years, We have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !
  • High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Nora from Malaysia - 2018.06.19 10:42
    We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Tony from Luxemburg - 2018.03.03 13:09